Ultra ProPrimer - Multi Surface Primer 1L

UltraTile ProPrime IT is a moisture tolerant, water based acrylic primer, sealer and bonding aid suitable for porous and non-porous substrates.

The product should be applied using a brush or roller and scrubbed well into the surface to avoid pooling. Allow to fully dry. For multi-coats, ensure each coat dries before you apply the next.

POROUS SUBSTRATES (including Calcium Sulphate Screeds)

UltraTile ProPrime IT should always be diluted before use.

• 1st coat: 3 parts water/1 part primer
• 2nd coat: 1 parts water/1 part primer

Very absorbent sub floors will always require a 3rd coat at 1 parts water / 1 part primer. Under good drying conditions, UltraTile ProPrime IT should be ready to receive an additional coat after 1-2 hours.